HONED PATTERNS

These patterns are available in all colors.

3 Height Random Ashlar – Honed Cutstone Veneer

A random ashlar pattern with Honed face and all other surfaces sawn. Provided in three course heights of 15% 3 5/8”, 50% 7 5/8” and 35% 11 5/8”. Standard joint size of 3/8”. Stone is provided veine cut.

3 Height Random Ashlar – Honed Cutstone Veneer

4 Height Random Ashlar – Honed Cutstone Veneer

A random ashlar pattern with Honed face and all other surfaces sawn. Provided in four course heights of 15% 3 5/8”, 40% 7 5/8”, 35% 11 5/8” and 10% 15 5/8”. Standard joint size of 3/8”. Stone is provided veine cut.

4 Height Random Ashlar – Honed Cutstone Veneer

Splitface Patterns

These patterns are common and typical to construction standards, however, custom patterns and mixes are welcome.

3-Height Random Ashlar-Split

A random ashlar pattern with a split face, split beds, and in three course height ranges of 20 percent at 1 1/2″ to 3″ height, 50 percent at 3″ to 6″ height and 30 percent at 6″ to 9″ height. Standard joint size varies from 3/8″ to 1 1/2″. Stone is fabricated with split faces, sawn backs, split beds and a combination of split and sawn ends. Stone is provided fleuri cut.

3-Height Random Ashlar-Sawn

A random ashlar pattern with a split face and sawn beds and in three course heights of 15 percent at 2 1/6″ height, 50 percent at 4 5/6″ height, and 35 percent at 7 1/2″ height. Standard Joint Size is 1/2″. Stone is fabricated with split faces and backs, sawn beds and a combination of split and sawn ends. Stone is provided veine cut.

2-Height Random Ashlar

A random ashlar pattern with a split face and sawn beds and in two course heights of 40 percent at 2 1/6″ and 60 percent at 4 5/6″. Standard joint size is 1/2″. Stone is fabricated with split faces and backs, sawn beds and a combination of split and sawn ends. Stone is provided veine cut.

Single Height Coursed Ashlar

A straight course pattern of a single height with a split face and sawn beds and height options of 2 1/6″, 3 1/2″, 4 5/6″ and 7 1/2″. Standard joint size is 1/2″.  Stone is fabricated with split faces and backs, sawn beds and a combination of split and sawn ends. Stone is provided veine cut.

3-Height Coursed Ashlar

A straight course pattern of three heights with a split face and sawn beds and three course heights of 15 percent at 2 1/6″ height, 33 percent at 4 5/6″ and 52 percent at 7 1/2″ height. Standard joint size is 1/2″. Stone is fabricated with split faces and backs, sawn beds and a combination of split and sawn ends. Stone is provided veine cut.